Apple Watch Digital Crown 在通知中心和控制中心滚动时缺少触觉反馈

您好，Apple 用户反馈团队：

我想反馈一个在我的 Apple Watch 上长期存在的 Digital Crown 触觉反馈问题，希望 Apple 能够协助确认这究竟属于软件问题还是设备本身的问题。

我的 Apple Watch 在通知中心（Notification Center）和控制中心（Control Center）使用 Digital Crown 上下滚动时，滚动过程中的触觉反馈会消失。

具体表现是：在这两个界面中，Digital Crown 本身可以正常旋转，页面也能够正常上下滚动，但是在滚动过程中没有通常的 Crown Haptic Feedback。当滚动到顶部或底部时，触觉反馈仍然存在。

而在表盘、设置以及其他普通 App 的长列表中，Digital Crown 的触觉反馈一直都是正常的。因此，这个问题并不是整个 Digital Crown 或 Apple Watch 的触觉反馈功能失效，而是集中出现在通知中心和控制中心的滚动过程中。

这个问题从我购买 Apple Watch 以来就一直存在，并且在多个不同版本的 watchOS 中都出现过。与此同时，我身边使用 Apple Watch 的朋友似乎都没有遇到类似的问题，这也让我比较怀疑是否与我的设备本身有关。

我希望 Apple 能够帮忙确认以下几点：

1. 这种情况是否属于已知的 watchOS 问题？
2. 是否有可能是某一批次或某些设备存在的硬件、固件或配置问题？
3. 如果其他 Apple Watch 用户通常不会出现这种情况，Apple 是否建议我更换设备，或者送修检测？

由于这个问题已经持续了较长时间，并且跨多个 watchOS 版本始终存在，我比较希望能够确认它究竟是系统层面的行为，还是我的设备存在异常。

感谢 Apple 用户反馈团队对这个问题的关注，也希望能够得到关于设备检测或更换方面的建议。

Dear Apple Feedback Team,

I would like to report a long-standing issue with Digital Crown haptic feedback on my Apple Watch and would appreciate your help in determining whether this is related to watchOS or to the device itself.

When using the Digital Crown to scroll in Notification Center and Control Center, the haptic feedback disappears during scrolling.

The Digital Crown itself works normally and the interface scrolls as expected, but there is no usual Crown Haptic Feedback during the scrolling process. However, haptic feedback is still present when reaching the top or bottom of the content.

In contrast, Digital Crown haptic feedback works normally on the watch face, in Settings, and when scrolling through long lists in regular apps. Therefore, this does not appear to be a general failure of the Digital Crown or the Apple Watch haptic system, but rather an issue specifically affecting scrolling in Notification Center and Control Center.

This issue has existed on my Apple Watch since I purchased it and has continued across multiple watchOS versions. At the same time, people around me who use Apple Watch do not appear to experience the same behavior, which makes me wonder whether the issue could be related to my specific device.

I would therefore appreciate Apple's guidance on the following:

1. Is this a known watchOS issue?
2. Could this potentially be related to a hardware, firmware, or device-specific configuration issue?
3. If this behavior is not normally seen on other Apple Watch devices, would Apple recommend replacing the device or having it inspected/service-tested?

Since the issue has persisted for a long time and across multiple versions of watchOS, I would especially like to understand whether this is expected system behavior or whether my particular device may be defective.

Thank you for taking the time to review my feedback. I would appreciate any guidance regarding device inspection, servicing, or replacement.